JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Please wait a moment
Kavan Falke 1800mm PNP - red KAV02.8088

Kavan Falke 1800mm PNP - red KAV02.8088

Kavan Falke 1800mm PNP - red KAV02.8088

Kavan Falke 1800mm PNP - red KAV02.8088

Kavan Falke 1800mm PNP - red KAV02.8088

Kavan Falke 1800mm PNP - red KAV02.8088

Kavan Falke 1800mm PNP - red KAV02.8088

Kavan Falke 1800mm PNP - red KAV02.8088

99% ready-made high-performance, 1800 mm wingspan, thermal sailplane of virtually unbreakable extruded polyolefin (EPO) with a carbon tail boom. KAVAN C2714-1450 brushless motor, 7x6” folding prop, R-20B ESC and 4 micro servos installed. Aileron, elevator, rudder (V-tail) and throttle control. For 3S LiPo 1200–1600 mAh (at least 20C).


Regularly, model aeroplanes are supposed to be scaled-down „full-size“ aircraft. However, our designers went the other way around; they have been thoroughly watering, weeding out, and 100% biologically fertilizing our tiny little Der Kleine FALKE for so long until she has grown up to 1800mm wingspan becoming the high-performance thermal RC sailplane FALKE 1800.

The EPO foam fuselage with a sleek carbon tail boom comes with the KAVAN C2714-1450 brushless motor, 7x6” folding propeller and KAVAR R-20B ESC featuring a BEC stabilizer. The detachable canopy is secured with a magnetic lock. The cockpit compartment offers a lot of space for your receiver and flight pack. The elevator and rudder servos are installed under the wing controlling the V-tail by a pair of push rods.

The two-piece EPO wing with a steel joiner is reinforced by carbon spars; the wing is secured with two plastic bolts to the fuselage. The ailerons are controlled by two servos installed in the wing driven with short wire push rods.

The EPO V-tail is detachable; secured with a plastic bolt to the fuselage for easy transport/storage.

FALKE 1800 is powered by the KAVAN C2714-1450 brushless motor with the KAVAN R-20B 20A ESC.

You will need an 11.1 V 1200–1600mAh flight pack (at least 20C) to fly your FALKE 1800.

You will need at least a 4-channel RC set to control your FALKE 1800; even a non-computer radio featuring the V-tail mixer would work as the aileron servos are controlled by a single channel (linked via a Y-cable). At least 6-channel computer radio will work best; independent aileron servo control and airbrake mixing (by extending ailerons simultaneously up) will help you to enjoy your FALKE 1800 to the fullest. Fortunately, even entry-level/budget-friendly radios like Radiolink AT9S or AT10II, Futaba T6K or T10J feature all the necessary mixes today. In this case, you will have to replace the aileron Y-cable installed in the kit with two 15–30 cm extension cables. The instruction manual contains a thoroughly tested set-up table to help you set up the FALKE 1800 easily.

ARTF set contents: EPO fuselage with the brushless motor, 20A ESC, 7x6" folding propeller and 2 servos installed, EPO wing with 2 servos installed, EPO horizontal tailplane, and instruction manual.

Wing span [mm] 1800
Length [mm] 1150
Weight [g] 660 - 710
Wing surface [dm2] 27
Controlled functions S,V,K(2),M
Build difficulty S0,S1
Operating difficulty P1,P2

Pohon a RC vybavení:

Motor *C2714-1450
Regulátor *KAVAN R-20B
Vrtulové listy *7x6“
Akumulátor KAVAN 11,1V 1200 mAh 30/60C nebo KAVAN 11,1V 1600 mAh 30/60C
Serva *4x GO-09
RC souprava min. 4 kanály s mixem pro motýlkové ocasní plochy
*) Součást ARF setu



Manufacturer Info
  • 0 items
Share Product
Parse Time: 0.015s