The MDM-1 FOX is a two-seat aerobatic legend in the glider sky, in the man-carrying, as well as in the model construction area. This has good reasons, because the machine was developed for uncompromising aerobatics and offers many expansion possibilities (EDF or turbine drive). The potential of the FOX is far reaching!
The mold-painted full-Gfk kit offers all the prerequisites for this and has received numerous reinforcements made of CfK that we have tried and tested.
We have deliberately chosen a scale of 1:4 to give you a compact, thoroughbred aerobatic glider with the flight characteristics of a large model. Therefore we also deliberately chose a 4 flap wing to give you the possibility to warp the airfoil accordingly and adapt it to the flight conditions, as well as to increase the maneuverability around the longitudinal axis in aerobatics.
The wing stub is made of 18x1mm aluminum tube with solid CfK rod inside. The included parts of the cockpit even allow for a prototype-like extension at your own discretion.
The flight characteristics can be classified as extremely good-natured. The FOX flies in any situation as if on rails, even in aerobatics it reacts agilely and dynamically.
- Wing and tailplane in GRP shell construction with CFRP reinforcements.
- GRP fuselage with CfK reinforcements
- Model ready painted in the mold
- Wing pluggable by means of aluminum CFRP round rod
- Ailerons, flaps and elevator as elastic flaps, rudder as cove
- Wing profile: HQ/W 2.5/11
- Elevator profile: NACA 0010
Required accessories (not included):
B-No.: 1 piece 8717 ROBBE RO-CONTROL PRO 14-130 6-14S -130(160)A OPTO controller
B-No.: 2 pieces 7370 Ro-Power Ultra Maxamp 4200mAh 14,8V battery pack
B-No.: 1 piece - Ro-BEC HV
B-No.: 1 piece 46091 XT-90 Adapter serial
B-Nr.: 1 piece 46037 Charging cable XT-90
B-No.: 1 piece 70700 Start trolley
B-Nr.: 1 piece 21150 Protective bags
|Flight weight approx. (g):
||Ro-Power Torque 5062 305KV Außenläufer
||PNP - PLUG N PLAY
- MDM-1 FOX 3.5 m PNP painted orange
- Ro-Power 5062 305 K/V outrunner motor installed
- Propeller 15x11 mounted
- 4 FS-128 BB MG HV digital servos installed
- 2 FS-525 BB MG HV servos installed
- Wiring in wing per MPX connector ready mounted
- Canopy with ready mounted canopy frame
- Aluminum tube wing connector, carbon reinforced
- Manual in German/English
Please note (from MSL)
Robbe's PNP gliders do not come with ESC's as this lets the user select their own as they may want a telemetry ESC from Spektrum, Jeti or another brand.