D-Power Infinity 250 - 250 cm fully-GFK ARF + electric glider DPIFT250X
£759.00

Brand:  D-Power
Part No: DPIFT250X
Barcode: 4251014713455
Availability : Special Order

The INFINITY 250 from D-POWER is a fully resilient all-rounder in high-quality, fully GRP construction with pendulum elevator and functional flaps. Whether aerobatic maneuvers at full throttle or gliding in thermals and on slopes - the flight characteristics of the INFINITY 250 leave nothing to be desired.

High-quality construction The electric glider model is manufactured entirely in GRP shell construction. All components are already elaborately painted in the form and prefabricated for a minimal construction effort.

• Made entirely of high quality GRP shell construction • Pendulum elevator • Modified RG-14 wing profile • in the form of painted GRP fuselage, tail units and GRP surfaces • Good visibility thanks to high-contrast block stripes on the underside of the surfaces • CFRP reinforcements in the fuselage and wings • massive surface connector made of carbon fiber • Short construction time thanks to a high degree of prefabrication> ARF +

Lots of space for the electronics The fuselage of the INFINITY 250 is specially designed for the electric drive. The built-in CNC milled battery board offers enough space for large batteries and the necessary electronics. The resin-coated GRP motor bulkhead also offers space for 35 mm internal rotor or external rotor motors.

• Laser-cut battery board built into the fuselage • Fuselage cabin offers space for 4S 4000 batteries • Resin-in GRP motor bulkhead • pre-installed servo frame • Cable harness already pulled through completely

ARF + means an extremely high level of prefabrication. We made a conscious decision against offering you this model with built-in motors and servos. Because with the ARF + equipment you have the possibility to equip your electric glider according to your preferences. All cable layers are completely laid, so that you only have to connect your electronic components to the cable harness that has been pulled through and plug the cables into the receiver in the fuselage. Spend a minimum of time in the handicraft basement - and maximum time on the airfield.

• Cable harness completely installed and integrated • MULTIlock® wing locking system installed • MPX high-current connector built into the fuselage and wing parts • pre-installed servo frame • Pre-turned rods, all linkages installed • Control horns already installed • Richly illustrated, German-language building instructions

Technical specifications • Span: 250 cm • Body length: 143 cm • Wing profile: RG-14 mod. • Wing area: 46.3 dm² • All-up weight approx .: 2086g (without battery)

Required accessories • Motor: D-Power AL35-08 • Controller: D-Power Comet 60A • Battery: 4S LiPo 3700mAh - 4000mAh • Propeller: 10x7 "(4S) • Rudder servos: 1x D-Power DS-340BBMG • Servos elevator: 1x D-Power DS-340BBMG • Servos ailerons: 2x D-Power DS-840BBMG • Servos flaps: 2x D-Power DS-840BBMG • Remote control system: at least 8 channels