The newest addition to the Overlander charger range, the RC-D100, is adapted to a full range of chemistries (LiPo, LiFe, LiIon, NiMH, NiCd and PB) and comes with a comprehensive set of leads making it fully-prepared for practically any battery type. This charger is specially designed to cater for the higher end user, but with the aid of a simple-to-use interface and a complete set of instructions, this charger is by no means limited to experts.
- Two independent charging circuits (dual 2x100W output on DC (or with power supply) and 100W can be distributed across 2 channels on AC)
- Terminal voltage control
- Re-Peak mode for NiMH/NiCD batteries
- Battery meter
- Battery internal resistance meter
- PC communications
- Lipo 1-6 Cell
- LiFe 1-6 Cell
- Lilon 1-6 Cell
- LiHV 1-6 Cell
- NiMH 1-15 Cell
- Lead Acid (PB) 2-20V
This chargers comes with two XH balance boards, XT60 with crocodile clips, two XT60 charge leads, two deans charge leads, and an AC power cord (UK Plug) and crocodile clip equipped lead for DC.
The RC-D100 has been created with automated safety precautions, including a charging current limit, capacity limit, temperature threshold and processing time limit.
This charger is also compatible with both iOS and Android smart phones via a Wi-Fi Module (sold separately), making operation easier than ever.
Input Voltage: AC 100-240V DC 11-18V
Charge Circuit Power: Ac Input 100W (Support Power Distribution) DC Input 2x100W
Discharge Circuit Power: 2x10W
Charger Current Range: 0.1-10A
Discharge Circuit Range: 0.1-5A
Current Drain for Balancing Port: Max 200mA/cell
Trickle Charging Current: 20mA-300mA & OFF
LiPo/LiFe/LiIon/LiHV Battery Cell Count: 1-6S
NiMH/NiCd Battery Cell Count: 1-15S
Pb Battery Voltage: 2-20V
Dimensions: 163 x 153 x 72mm
Net Weight: 975g
Please Note for Smart Phone Control & moniter an Optional Wi-Fi module is Required